UK laptop battery blog

Download Free Acer TravelMate 4600 battery Service Guide pdf. This Acer TravelMate 240 Repair Manual guide is a maintenance troubleshooting and instruction owner manual reference used for maintaining, disassembly and servicing the Acer TravelMate 240. Acer TravelMate Service Manual It provides comprehensive information on identifying Acer TravelMate 240 features, components, and spare parts troubleshooting problems and performing disassembly procedures.

Table contents of Acer TravelMate 240 Manual

* System Specifications
Features ~ System Block Diagram ~ Board Layout ~ Panel ~ Indicators ~ Keyboard ~ Touchpad ~ Hardware Specifications and Configurations.
* System Utilities
BIOS Setup Utility ~ acer travelmate 4100 battery ~ System Utility Diskette ~ System Diagnostic Diskette
* Machine Disassembly and Replacement
General Information ~ Disassembly Procedure Flowchart ~ Removing the Battery Pack ~ Removing the Hard disk drive Module ~ Removing the DVD-ROM and Floppy disk drive Module ~ Removing the Video Capture Kit ~ Removing the Extended Memory ~ Disassembling the LCD ~ Removing the LAN Board ~ Removing the Upper Case ~ Removing the Lower Case ~ System Upgrade Procedure
* Troubleshooting
System Check Procedures ~ Power-On Self-Test (POST) Error Message
* Jumper and Connector Information
* FRU (Field Replaceable Unit) List
* Appendix A Model Definition and Configuration
* Appendix B Test Compatible Components
* Appendix C Acer Travelmate 4500 battery
* Index

Charging at high and low temperatures

Rechargeable laptop battery operate in a reasonably wide temperature range. However, this does not automatically allow a charge in the same temperature range. While the use of batteries in hot or cold environment can not be avoided, the users, the conditions during the load somewhat under control. The charge should be strictly carried out at moderate temperatures.

In general, older battery technologies, such as Nickel-cadmium, tolerant loading at extreme temperatures. Nickel-cadmium DELL Inspiron B120 battery, Dell Inspiron 8600 battery can be recharged with a quick charge within approximately 1 hours. Such a fast charging should be done within the temperature range from 5 ° to 45 ° C. An even narrower temperature range from 10 ° to 25 ° C, however, yields better results.

Charging below 5 ° C caused a reduced Ladekoeffizienten of 0.1 C (one tenth of the capacity). This is in the area where oxygen and hydrogen inside the cell can be reduced. Due to the declining settings at lower temperatures, leading to a too fast charging excessive cell pressure, which can lead to a Zellenleck. Such as  Dell Inspiron 5100 battery ,Dell XPS M140 battery can be charged under these conditions fully before.

Industrial Dell XPS M1210 battery that require rapid charging at low temperatures, include a thermal circuit to keep the battery in a temperature range to be allowed. As soon as the charging temperature is lower than is produced during the loading process gas, which in turn leads to a warming, and thus improve the loading conditions. The ideal charger automatically adjusts itself so that there is a balance between gas and charging.

Note the use of charging temperature on the Ni-MH battery that is particularly important. Should be in the 0 ° C to 40 ° C of ambient temperature batteries. Below 0 ° C under an internal rechargeable battery charge will not normally lead to irreversible performance continued to decline. Higher than 40 ° C charge, will lead to the possibility of leakage.

MAX8671X include thermal management, even in the heat conditions are not ideal for small handheld devices are also able to avoid overheating. When the temperature exceeds 100 ℃ die, it will be in compliance with the 5% / ℃ reduce the input current. In all circumstances, ISYS higher priority than current feedstock, therefore, reduce the input current is reduced when the first charge current. If the charge current is reduced, the junction temperature reaches 120 ℃ well, no more, the current input power from the battery to power the system load. Chip temperature limit circuit and thermistor input (THM) has nothing to do, work processes independently, THM general use of the external thermistor input monitors the battery temperature (typical applications).

A modern battery is a delicate storage device that requires protection to safeguard against damage. The most basic protection

is a fuse that opens on excess current. Some fuses disengage permanently and render the battery useless once the filament is

broken; other safety devices are resettable. The Polyswitch? is such a resettable fuse. Connected into the battery’s current

path, this device creates a high resistance on excess current. The Polyswitch? reverts to the low ON position when the

condition normalizes, allowing operation to resume.

A major concern arises if static electricity or a faulty charger destroys the acer laptop battery’s protection circuit. This

may result in permanently fusing the solid-state switches in an ON position without the user’s knowledge. A acer aspire 3600

battery with a faulty protection circuit may function normally but will not provide protection. If charged over a voltage

limit (4.20V/cell should not be exceeded) with a defective charger, venting with flame could occur. Such a situation must be

avoided at all cost. Shorting such a battery could also be hazardous.

Small lithium-ion packs with spinel (manganese) chemistry containing one or two cells may only include a fuse as protection.

Spinel is more tolerant to abuse than cobalt and the cells are deemed safe if below a certain size.

Another Dell Inspiron 6000 battery that contains high-level protection is lithium-ion. This is done to assure safety under

all circumstances while in the hands of the public. Typically, a Field Effect Transistor (FET) opens if the charge voltage of

any cell reaches 4.30V. A separate fuse opens if the cell temperature approaches 90°C (194°F). In addition, a disconnect

switch in each cell permanently interrupts the charge current if a safe pressure threshold of about 10 Bar (150 psi) is

exceeded. To prevent the battery from over-discharging, the control circuit cuts off the current path at about 2.50V/cell.

Prolonged storage at voltages of 1.5V/cell and lower damages the lithium-ion, causing safety problems if attempted to

recharge.

We know each parallel string of cells in a lithium-ion pack needs independent voltage monitoring. In addition, each cell in

series must be monitored for voltage. The more cells that are connected in series, the more complex the protection circuit

becomes. Four cells in series is the practical limit for commercial applications.

The internal protection circuit must be designed to add as little resistance as possible to the current path. The circuit of

a Asus Eee PC Series laptop  battery often consists of two FET switches connected in series. One FET is responsible for high,

the other for low voltage cut-off. The combined resistance of the FETs in the ON position is 50-100milli Ohms (mW). This

virtually doubles the internal resistance of a battery pack.

When using a laptop as a desktop replacement the Acer 5500 battery should not be left in for long periods of time. The laptop will over time discharge the Acer Aspire 5500 battery. Remove the battery,making sure that it is charged to 50% and store it in a dry, warm place. Ensure that it is wrapped protectively and nothing will be dropped on it. Now let me tell you many useful tips to help you protect your aspire 5500 laptop battery.
1. Aspire 5500 laptop battery life (and its recharge times) will vary based on many factors including screen brightness,applications,features,power management and other customer preferenes.It’s a good idea to set screen saver blank to 1 to 2 minutes of your notebook and turn down the LCD brightness of your portable computer.
2. Avoid using a CD or DVD in your aspire 5500 pc.Optical drives consume large amounts of power to spin up CDs and DVDs.Copy the data you need on an optical disc to your laptop’s hard drive or a thumb drive before traveling.
3. Avoid very hot or cold temperatures.Extreme temperatures could effect ACER aspire 5500 battery’s performance and can even cause permanent damage. Try to charge and use the battery at room temperatures.
4. A new rechargeable battery usually comes in a discharged condition.Therefore,you need to fully charge the aspire 5500 laptop battery before you use it.In addition,new battery requires two to three charge/discharge cycles before it can condition to full capacity.

With mobile computing requirements imporved, more and more laptop

computers being integrated into the work and life, But most customers

while enjoy the mobile living facilities have to face a very headache

of the problem that the battery of life.
Dell inspiron 6000 battery has designed a very portable booth that uses
induction to charge the Z600 wirelessly whenever it is placed in the
holder.
To extend dell laptop battery is the most fundamental way to reduce the

charge and discharge times, everyone in the room when using the laptop

will often plug an external AC power supply at the same time and

battery, in fact, this time on the battery hurt the most, because the

first battery-powered laptop, as long as Discontent is the power to

detect charging, and repeatedly would give rise to unnecessary charging

and discharging several times, seriously reduce battery life. In this

case, the general practice is to take out the battery, but this is a

direct consequence of the work was very inconvenient, while many of the

plug causes the battery and notebook battery occlusal problems. Is

there no other way to protect the battery yet? Here I present a simple

way:
Dell’s Latitude series of notebooks designed a key combination Fn +

F2, when inserting an external power supply and press the key

combination will stop the use of laptop batteries, direct use of an

external power supply, so no matter how long the battery will not

generated discharge action, once disconnect the laptop detects external

power supply will automatically switch to the battery, prolonging

battery life.

In the recent “battery” incident, the two giants notebook Dell, Lenovo ThinkPad has provoked both “fire” the upper body.

Last week, a HP laptop battery explosion occurred, declared the HP has become a “battery” incident of a pair of fellow

sufferers.
According to media reports, last Monday Taiwan HP laptop almost died in flames, Fortunately, users found the battery time

smoking, and risk their lives to open the battery be removed and thrown into the parking lot. Instant, notebook batteries

from smoke to fire or explosion development
At present, many users of laptop batteries for use just to stay in the primary stage, how to protect the as well as the

rational use of all batteries do not know. Whenever these big customers to complain about life is too short or long life is

not at the same time is first of all carefully from the normal use of their own look for the reasons for this? Of course,

these two problems caused by the hp pavilion zv5000 laptop battery does not rule out the reasons for their quality, but the

vast majority of the current situation, improper use of man-made is a very common phenomenon.